Practical hands-on courses including lab-based sessions and project work
Get real-world experience with our placement years
This multidisciplinary, professionally accredited programme will allow you to benefit from hands-on experience and gain specialist knowledge in product design and integrated systems.
Mechatronic engineering is the study of systems that require a combination of mechanical, electronic and computer engineering, such as robotics, digitally controlled engines and self-driving cars. Our programme was the first of its kind in 1984 and continues to be so well regarded that many of our graduates go on to coordinate teams of engineers or move upwards into engineering management.
Your degree will begin with a common first year, where you will be taught a series of modules that are taken by all first-year engineering students. We will introduce you to many of the key features of engineering, equipping you with a well-rounded understanding and skill set and an appreciation for the interdisciplinary nature of the subject.
Following the first year, the mechatronics programme never loses the interdisciplinary focus that modern engineering has become. You will continue with specialist modules in the areas of mechanical and electronic engineering, as well as subjects such as control. You will also have the freedom to pick modules most appropriate to your areas of interest.
During year two, you will gain experience in project management and complete a team project to design, build and test a small mobile robot, aimed at following a guided pathway while completing a set task. Previous examples have included transporting hazardous liquid waste, and dribbling a ball and scoring a goal. On this programme, you will undertake a year in industry, gaining valuable experience and enhancing your employability. We have extensive links built through our leadership in research and have students undergoing placements with multinational corporate companies through to smaller specialist SMEs. Typically, this is undertaken during your third year, after you have gained a reasonable amount of engineering knowledge. Once you have completed your placement, you will write an extended reflective piece about your time spent with the company.
The BEng course is accredited by the Institution of Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer and partly meeting the academic requirement for registration as a Chartered Engineer. The degree is also professionally accredited by the Institution of Mechanical Engineers (IMechE). Teaching is delivered by world-class academics and shaped by their outstanding research output. You will gain hands-on experience with access to cutting-edge facilities and an array of high-quality equipment in our state-of-the-art engineering building.
MEng Mechatronics
We also offer a MEng Mechatronics (Placement Year) programme, which is accredited as meeting complete fulfilment of the educational requirements to become a Chartered Engineer. This programme provides further skills, knowledge, and experience, with a focus on leadership and management. Students wanting to transfer to this programme must achieve a minimum threshold at the end of year two.
Mechatronic engineers are experts in bringing together elements from mechanical and electronic engineering, control and automation, and as such, you are at the forefront of innovation in engineering. Your multidisciplinary skill set allows you to see the bigger picture of design and build projects, and your knowledge of engineering combined with technology makes you a highly desirable employee across many sectors. Our graduates have found careers in a range of industries, from automotive and aerospace, to robotics and energy – and some have even gone on to lead in their specialist field as academics. The ability to think creatively to solve problems, alongside experience gained managing projects and applying your practical and technical knowledge will make you a desirable employee for careers even beyond the scope of engineering. Graduates from our Engineering degrees are well-paid too, with a median starting salary of £29,000 (HESA Graduate Outcomes Survey 2023).
Here are just some of the roles that our BEng and MEng Mechatronic Engineering students have progressed into upon graduating:
Mechatronic Engineering – Rail-Ability Ltd
Electrical Engineer – Aston Martin
Graduate Electronics Engineer – JCB
Robotics Engineer – Electric Eel
Electronic Technician – Laser Quantum
Offshore Operations Graduate – Shell
Software Engineer – Jaguar Land Rover
CERN Doctoral Student – CERN
Electronic Control Systems Engineer -– Triumph Motorcycles Ltd
Aerospace Engineer – Rolls Royce
Motor Controls Engineer - Mercedes
Lancaster University is dedicated to ensuring you not only gain a highly reputable degree, you also graduate with the relevant life and work based skills. We are unique in that every student is eligible to participate in The Lancaster Award which offers you the opportunity to complete key activities such as work experience, employability/career development, campus community and social development. Visit our Employability section for full details.
Gain vital skills and experience
Each of our Engineering undergraduate programmes comes with an optional placement with a cutting-edge engineering company. Each placement will give you practical, realistic workplace experience that will make you attractive to employers after your graduation. In recent years, Lancaster University students have taken work placements with EDF, Jaguar-Land Rover, Mercedes AMG, Network Rail and more.
Entry requirements
Grade Requirements
A Level ABB
Required Subjects A level Mathematics and a Physical Science, for example, Physics, Chemistry, Electronics, Computer Science, Design & Technology or Further Mathematics.
GCSE Mathematics grade B/6, English Language grade C/4
IELTS 6.5 overall with at least 5.5 in each component. For other English language qualifications we accept, please see our English language requirements webpages.
Other Qualifications
International Baccalaureate 32 points overall with 16 points from the best 3 Higher Level subjects including either:
Mathematics HL grade 6 (either pathway) plus grade 6 in a HL Physical Science
Mathematics HL grade 6 (either pathway) plus grade 6 in two SL Physical Sciences
Mathematics SL grade 7 (Analysis and Approaches) plus HL grade 6 in a Physical Science
Acceptable physical science subjects include Physics, Chemistry, Computer Science, and Design Technology
BTEC (Pre-2016 specifications): Distinction, Distinction, Merit in an Engineering related subject to include Distinctions in Mathematics for Engineering Technicians and Further Mathematics for Engineering Technicians units.
BTEC (2016 specifications): Distinction, Distinction, Merit in an Engineering related subject to include Distinctions in the following units – Unit 1 Engineering Principles, Unit 7 Calculus to Solve Engineering Problems. Unit 8 Further Engineering Mathematics is highly recommended.
We welcome applications from students with a range of alternative UK and international qualifications, including combinations of qualifications. Further guidance on admission to the University, including other qualifications that we accept, frequently asked questions and information on applying, can be found on our general admissions webpages.
Delivered in partnership with INTO Lancaster University, our one-year tailored foundation pathways are designed to improve your subject knowledge and English language skills to the level required by a range of Lancaster University degrees. Visit the INTO Lancaster University website for more details and a list of eligible degrees you can progress onto.
Contextual admissions
Contextual admissions could help you gain a place at university if you have faced additional challenges during your education which might have impacted your results. Visit our contextual admissions page to find out about how this works and whether you could be eligible.
Course structure
Lancaster University offers a range of programmes, some of which follow a structured study programme, and some which offer the chance for you to devise a more flexible programme to complement your main specialism.
Information contained on the website with respect to modules is correct at the time of publication, and the University will make every reasonable effort to offer modules as advertised. In some cases changes may be necessary and may result in some combinations being unavailable, for example as a result of student feedback, timetabling, Professional Statutory and Regulatory Bodies' (PSRB) requirements, staff changes and new research. Not all optional modules are available every year.
This module introduces fundamental applications of engineering science to build physical components, structures and systems and create functionality across all engineering disciplines. The basics of manufacturing and processes will be explored together with design principles, methods of sensing physical, electromagnetic, electrostatic and chemical effects, and converting these effects to electrical signals and mechanical actuation.
Over the course of this module, students will learn how to manipulate and manufacture objects, synthesise chemical compounds, as well as build and code electrical interfaces. At the end of the module, students will complete a group project using CAD tools to analyse, design, capture, and manufacture engineering components, sensor interfacing, data conversion and data processing.
This module introduces concepts associated with the fundamentals of engineering science relevant to chemical, mechanical, nuclear and electrical/electronic systems. Students will learn how physical principles associated with heat, energy transfer, radiation, fluid mechanics, forces, kinetics, impedance, and atomic level behaviour govern the function of structures, processes, components, devices, and systems. These principles provide a foundation for all engineering degree programmes. By the end of the module, students will be able to apply their knowledge of these principles in a practical manner to investigate real-world challenges.
This module introduces key numerical and analytical concepts relevant to the engineering disciplines providing a foundation for all engineering programmes. Students will consolidate their skills in the use of complex numbers, calculus, differential equations, vectors, matrices and transforms as engineering tools that can be applied to the analysis and design of engineered materials, components, devices, structures, assemblies and systems.
MATLAB and Excel will be introduced to both solve mathematical problems, apply mathematical principles to data sets to generate curves, statistics and trends. Students will learn basic programming in order to implement mathematical algorithms commonly used in the engineering disciplines. Supporting laboratories will involve tasks associated with the visualisation of mathematical solutions, the processing of data sets and the use of programming techniques to implement solutions on an embedded processor or personal computer.
Core
core modules accordion
This module considers a range of material in the wider business development area. Students are encouraged to think with creativity, entrepreneurial flair and innovation. Practical sessions allow students to demonstrate their progress on a weekly basis through idea generation, peer presentations, elevator pitches and formal presentations. The module is accompanied by a number of external industrial speakers who have been successful in their own business endeavours and are keen to pass on that knowledge.
Students will become familiar with a rich mixture of experiential learning opportunities, that develop a wide range of transferable skills in the context of engineering entrepreneurship. The module will focus on the development and use of business plans and marketing strategies. Students will prepare a business plan, discuss team dynamics and the requirements for entrepreneurial activity. Additionally, the appropriate terminology to use when developing business projects will be explored. Students will discuss relevant aspects of company finance, uncertainty in business ventures and techniques for analysing markets. They will also examine frameworks for marketing and structuring a business plan and will develop the ability to analyse potential markets and sources of funding.
Whilst alternating topic focus, this module explores RF engineering and electromagnetic processes in general. Students will gain knowledge of RF engineering, the decibel scale, and will explore complex number review. Additionally, the module will cover AC circuit analysis, and will provide complex representation of waves and transmission lines, along with seminars in RF transmission of data and basic RF receiver architectures.
The electromagnetic portion of the module will cover Electrostatics, including electric charge, electric field, electric flux density and electrostatic potential. Students will develop knowledge of inverse square law of force, dielectric polarisation and permittivity, as well as capacitance, energy storage, parasitic capacitance and electric screening.
Students will develop the level of understanding necessary to describe the concepts of potential, charge, field and capacitance, and will learn to apply Ampere, Faraday and Coulomb law. Students will also gain an understanding of ferromagnetic materials, and will develop the necessary skillset to calculate the magnitude and direction of the electric field strength, as well as discussing Gauss theorem and the relationship of electric flux to electric charge. Finally, students will be able to carry out noise calculations for RF systems, calculate component values and transmission line dimensions to match impedances, and will gain knowledge in the application of Smith charts to analyse an RF circuit.
This module introduces students to numerate aspects of engineering. It is designed to provide students with a broad and flexible array of mathematical methods for the analysis of data and signals. It also intends to illustrate the essential role of computing in the application of these skills. Students will use calculus for the analysis of trigonometric, non-linear, polynomial and exponential functions, and will sketch multivariable functions with a relation to engineering on three-dimensional Cartesian axes.
Additionally, students will evaluate the significance of differential equations in the description of an engineering system and will apply methods such as Laplace, integration and substitution to find the solution of these equations. They will also develop the ability to analyse systems in both the time and frequency domain using Fourier and Laplace transformations. Students will learn to apply the spectrum of approximate methods that exist for finding the roots of equations, definite integrals and linear approximations.
The matrix representation of coefficients and their correspondence will be applied to arrays in software, including the use of manipulations such as the inverse matrix. Students will use the concept of least squares analysis in order to assess the consistency of data. Finally, they will develop the ability to use a software package such as Excel for multivariable analysis of a given function and to produce appropriate graphical outcomes.
This module introduces the subject of structural and stress analysis, and also covers mechanical vibrations. Students will develop an understanding of the physical behaviour of structural components and their design with reference to stress and deformations. They will also engage with mathematical and physical models for the analysis and design of statically indeterminate structures. In addition, the module encourages students to quantitatively analyse the behaviour of oscillatory systems with one or more degrees of freedom.
Students will learn to discuss the meaning and significance of the terms natural frequency, resonance and damping in relation to vibrating systems. They will also find the natural frequencies and, when there is more than one degree of freedom, the corresponding mode shapes for such systems. Students will gain a working knowledge of the essentials of mounting a machine so that only small force amplitude is transmitted into the foundation. An awareness of how an accelerometer works will be developed, including its advantages and disadvantages, and how to use it to measure vibration. Additionally, students will gain the ability to carry out two dimensional stress and strain transformation calculations, and will be able to calculate maximum shear stresses in shafts and beams subject to shear loads.
Students will be introduced to a range of key concepts in engineering project management and will put some of these into practice by means of an interdisciplinary group project. This module aims to motivate students to produce and test a functional electro mechanical machine to meet a given specification for example, the development of a mobile robot which follows a line. Students will develop a range of skills including, the ability to describe a mechanical/electrical system at the block diagram level, identifying its power and signal flows and writing an overall performance or functional specification. They will also acquire the knowledge necessary to integrate the functional requirements with other needs such as maintainability, safety, manufacturability, environmental impact and regulatory compliance. The requirements for interface management including spatial, mass, environment, control, failure modes, and energy, will also be discussed.
Additionally, students will develop the skill set required to prepare an interface management plan for a complete project and interface specifications for the subsystems/components. They will discuss the project lifecycle including specification, design, manufacture, commissioning, maintenance, modification and disposal. Finally, students will apply the principles of validating the design of a complex system using analysis, sample testing, type testing, commissioning, system tests and acceptance.
This module is designed to enhance students’ understanding of system dynamics and feedback at the block diagram level, by providing tools for the analysis of linear single degree freedom systems. Students will gain the ability to use appropriate instrumentation for feedback and data-logging purposes. The module will enable students to interface devices such as memory, digital IO and analogue IO to a microprocessor or microcontroller. They will also discover how to access such devices from within a program using C and/or Assembler.
On successful completion of this module, students will be able to develop single degree freedom models for simple mechanical, electric and electromechanical systems. They will also be able to discuss the assumptions necessary to develop such linear models and have an awareness of nonlinear and chaotic systems. Additionally, students will develop the ability to analyse 1st and 2nd order models in both the time and frequency domain, including vibrations and asymptotic stability. They will write down the transfer function of a system from its differential equation and understand the significance of the poles/zeros.
Further skills available on the module include the ability to manipulate block diagrams of open and closed-loop systems and the design of proportional, integral, derivative, velocity and multi-term controllers. Finally, students will construct and use Bode diagrams, and will develop the knowledge required to analyse the function and physical operation of a range of common types of transducer, e.g. for the measurement of strain, force, temperature and acceleration.
This module will enhance students’ knowledge of heat transfer calculations and aims to outline where these are essential to engineering design. Students will develop an understanding of electric power systems, including the characteristics of the main types of electric machine. In addition, they will gain the ability to estimate steady-state heat transfer rates and will be able to size simple parallel and contra flow heat exchangers. They will also develop the level of understanding required to estimate temperature distributions within 1-D or rotationally symmetric systems in which there is steady heat flow, as well as correctly sizing cooling fins.
Students will set up appropriate boundary conditions for 3-D heat conduction problems that are to be solved numerically using a software package and will estimate the time it takes for a thermal system to reach a steady state. Finally, they will be able to perform calculations to predict the performance of a single-phase induction motor and will be able to analyse the starting, speed and torque control methods used on induction motors.
Optional
optional modules accordion
This module will introduce digital logic design targeting programmable logic devices, in particular FPGAs: Field-Programmable Gate Arrays. Student will look at major steps involved in modern digital logic design development such as simulation, time and hardware resources optimisation, and floorplanning. The preferred programming language will be VHDL while target FPGA devices will belong to the Xilinx family. Students will gain practical experience of a widely employed vendor specific software development environment, such as Xilinx ISE 10.1 or Mentor Graphics ModelSim.
Additionally, the module introduces fundamental skills in digital logic design programming, development implementation and debugging, and students are given the opportunity to understand and use the concept of parallelism, along with developing instincts as to what design approach should be adopted, depending on the targeted application. Students will also acquire experience in using FPGA devices which are fundamental in ASICs development and verification.
On successful completion of the module, students will develop the ability to design digital logic circuits for a range of applications. They will apply state-of-the-art digital logic design development and verification methods, and will learn to use the most prevalent programming language in digital design for Programmable Logic Devices (PLDs), i.e. VHDL. Students will also gain the knowledge necessary to discuss PLDs in general and FPGAs in particular, including the major steps involved in digital circuit design development and implementation. Finally, students will gain the level of understanding required to use practical skills gained from hands-on experience of FPGAs containing development boards.
Introducing the fundamentals of materials engineering, this module addresses a range of topics including atomic bonding, the origins of the elastic models and elastic and plastic deformation mechanisms in crystalline materials. In addition, the module explores defects and crystalline imperfections, strengthening mechanisms in crystalline materials, Fe-C system and non-equilibrium phase transformations.
It will also address the effects of wear such as the nature of surfaces, describing and measuring surface form, static and kinetic friction, adhesive and abrasive wear regimes, and mechanical design. This section of the module will look at combined loadings, thin walled theory, yield criteria and failure mechanisms. Students will gain an understanding of the manufacturing processes and surface finish, tolerances, limits and fits, and will work with standard components such as rolling bearings, plain bearings and seals.
Students will develop the ability to classify the fundamental types of solid materials according to bond type, energy and physical properties. They will also learn to describe the unit cell types adopted by industrially significant metals, and will gain familiarity with the use of direction and Miller indices as a method of describing planar symmetry, and the crystallographic basis of anisotropy. Additionally, the module will enhance students’ ability to describe fundamental materials concepts of solid solutions, point defects, dislocations and atomic diffusion. Finally, students will develop an understanding of how finite element analysis is able to supplement the engineering design process, and will be aware of the need to validate the results of a finite element analysis.
Core
core modules accordion
You will spend this year working in a graduate-level placement role. This is an opportunity to gain experience in an industry or sector that you might be considering working in once you graduate.
Our Careers and Placements Team will support you during your placement with online contact and learning resources.
You will undertake a work-based learning module during your placement year which will enable you to reflect on the value of the placement experience and to consider what impact it has on your future career plans.
Core
core modules accordion
Students will learn how to process signals using techniques such as Fourier transforms, sampling, discrete time and space domains, and digital filtering, putting their knowledge into practice in MATLAB software which equips students with comprehensive knowledge of digital code used in engineering environments.
This module develops students’ ability to analyse engineering problems by creating and designing solutions to meet real-world industry needs through a combination of critical thinking and hands-on practical skills.
Students will be equipped with a wide range of skills to determine the most appropriate sampling and filtering methods for processing signals whilst also developing their ability to write computer programmes for data analysis, creating recommendations and designing solutions.
This module examines the role of management and its relevance to engineering today. In this context, specific knowledge about manufacturing systems and project financial appraisal will be introduced, together with relevant aspects of law and human resource management, industrial organisation and project costing. Students will receive an outline of company finance and reporting, along with an overview of environmental reporting, quality and safety management.
The module will reinforce students’ understanding of the role of management in industry, as well as how modern manufacturing operations are organised financially. Students will financially evaluate both large and small projects as the basis for major decisions, and will develop knowledge of what quality is and its importance to all organisations. Additionally, students will apply suitable tools for the improvement of quality, and will come to understand the importance of environmental reporting. The module will also enable students to carry out a basic level of safety management.
The aim of this module is to give students experience in managing a research project and help them develop an in depth knowledge of a specific, specialist area of their subject. Students will have the opportunity to learn professional software, research, design or experimental skills consistent with their subject. They will be assigned a project title and a project supervisor who will guide and advise them throughout the project. The project involves the production of a literature review, project plan, an oral presentation, a final report and a poster.
The module will offer different outcomes depending on which topic students choose to work on. For example, they can gain knowledge of the scientific principles and methodology necessary to underpin their education in the engineering discipline.
Students can also acquire the ability to apply and integrate their understanding of other engineering disciplines, to support the study of their own engineering discipline. Alternatively, students are offered the opportunity to gain an understanding of engineering principles and the ability to apply them to analyse key engineering processes.
There will be an opportunity for students to apply quantitative methods and computer software, relevant to their engineering discipline, to solve engineering problems. On the other hand, students may decide to strengthen their understanding of customer and user needs and the importance of considerations such as aesthetics. They could also take the opportunity to reinforce their workshop and laboratory skills.
Students will develop skills in analysing some commonly occurring machine elements during this module. Discovering how these devices work to support and transmit force and load, leads to better decision making in their selection and use as a machine component, either individually or as part of a more complex assembly.
Over the course of the module, students will develop the level of skill required to establish the geometry of contacts between bodies, including relative radii of curvature. They will be able to estimate stresses and loads between bodies at such contacts, and will understand how to carry out calculations on involute gear geometry. Additionally, students will learn to carry out calculations involving gear trains including efficiency and inertia considerations, and will gain the knowledge necessary to estimate the load capacity of plain (hydrodynamic) bearings. They will also develop their understanding of how loads are carried by bolted joints.
This module aims to provide all students with a firm understanding of mechatronic and robotic systems. The robotics elements of this course encompass a wide range of robotics fundamentals, as well as an introduction to advanced topics including artificial neural networks, fuzzy systems and future challenges in vision systems. A real-time programming challenge is set to enable Bradley, a bipedal robot to walk. Students will be encouraged to consider the practicalities of selecting drive systems with respect to key engineering principles relating to pneumatic and hydraulic systems, exploring the benefits and disadvantages of fluid power systems and application of these to advanced robotics and automation.
This module aims to equip students with comprehensive knowledge and understanding of power electronics and applications by learning methods of converting and inverting voltage signals and how to use them to drive electric motors. As electric vehicles and renewable sources of power are becoming increasingly important, the module will also cover applications in electric power utilities and renewable power, including wind and solar.
Students will develop an understanding of scientific principles and methodology of power semiconductor devices, power electronic converters, dc/ac motor drives and the applications and needs for high power electronic switches/converters in the electric power utility industry.
On completion of this module, students will be equipped with industry knowledge to apply their skills to meet real world engineering needs with confidence and professional and ethical responsibility.
This module provides fundamental understanding of the principals involved in the design and analysis of complex mechanical systems. The aim of this module is to develop students’ skills and abilities in mechanics, particularly in relation to mechanisms and linkages, balancing of rotating and reciprocating machinery and inertia forces in mechanisms. Students will gain experience in kinematics and kinetics of mechanisms, including velocity diagrams and instantaneous centres. Additionally, the module will introduce rigid body dynamics and motion described in various co-ordinate systems, along with balancing rotating and reciprocating equipment.
This module will enable students to use principles of forces and moments equilibrium (with inertia forces) to estimate the forces acting on rigid bodies that are accelerating in two dimensions. They will also use kinematic principles to relate displacements and velocities of points on linkages of rigid bodies. Additionally, the module will enhance the ability of the students to find the location of instantaneous centres in a linkage. They will then learn to apply the instantaneous centre method to investigate the velocities of points on a linkage.
Students will learn how to find the velocity of any point of selected planar mechanisms using velocity diagrams and the velocity image theorem. They will also develop the necessary knowledge to find the acceleration of any point of selected planar mechanisms using acceleration diagrams and the acceleration image theorem. Finally, students will apply the idea of energy conservation to ideal systems.
Fees and funding
Our annual tuition fee is set for a 12-month session, starting in the October of your year of study.
We set our fees on an annual basis and the 2025/26 home undergraduate
entry fees have not yet been set.
There may be extra costs related to your course for items such as books, stationery, printing, photocopying, binding and general subsistence on trips and visits. Following graduation, you may need to pay a subscription to a professional body for some chosen careers.
Specific additional costs for studying at Lancaster are listed below.
College fees
Lancaster is proud to be one of only a handful of UK universities to have a collegiate system. Every student belongs to a college, and all students pay a small college membership fee which supports the running of college events and activities. Students on some distance-learning courses are not liable to pay a college fee.
For students starting in 2025, the fee is £40 for undergraduates and research students and £15 for students on one-year courses.
Computer equipment and internet access
To support your studies, you will also require access to a computer, along with reliable internet access. You will be able to access a range of software and services from a Windows, Mac, Chromebook or Linux device. For certain degree programmes, you may need a specific device, or we may provide you with a laptop and appropriate software - details of which will be available on relevant programme pages. A dedicated IT support helpdesk is available in the event of any problems.
The University provides limited financial support to assist students who do not have the required IT equipment or broadband support in place.
Study abroad courses
In addition to travel and accommodation costs, while you are studying abroad, you will need to have a passport and, depending on the country, there may be other costs such as travel documents (e.g. VISA or work permit) and any tests and vaccines that are required at the time of travel. Some countries may require proof of funds.
Placement and industry year courses
In addition to possible commuting costs during your placement, you may need to buy clothing that is suitable for your workplace and you may have accommodation costs. Depending on the employer and your job, you may have other costs such as copies of personal documents required by your employer for example.
The fee that you pay will depend on whether you are considered to be a home or international student. Read more about how we assign your fee status.
Home fees are subject to annual review, and may be liable to rise each year in line with UK government policy. International fees (including EU) are reviewed annually and are not fixed for the duration of your studies. Read more about fees in subsequent years.
We will charge tuition fees to Home undergraduate students on full-year study abroad/work placements in line with the maximum amounts permitted by the Department for Education. The current maximum levels are:
Students studying abroad for a year: 15% of the standard tuition fee
Students taking a work placement for a year: 20% of the standard tuition fee
International students on full-year study abroad/work placements will be charged the same percentages as the standard International fee.
Please note that the maximum levels chargeable in future years may be subject to changes in Government policy.
Scholarships and bursaries
You will be automatically considered for our main scholarships and bursaries when you apply, so there's nothing extra that you need to do.
You may be eligible for the following funding opportunities, depending on your fee status:
Unfortunately no scholarships and bursaries match your selection, but there are more listed on scholarships and bursaries page.
Scheme
Based on
Amount
Based on {{item.eligibility_basis}}
Amount {{item.amount}}
We also have other, more specialised scholarships and bursaries - such as those for students from specific countries.
A generous donation from the family of Tom Millen will enable an outstanding Engineering student from a disadvantaged background to benefit from an annual bursary of £3,000.
This award is in memory of Tom Millen, who served as Superintendent of Laboratories and Workshops in the School of Engineering at Lancaster University. He began working for the School in 1969 and retired in 1977.
Each year, a £3,000 bursary will be offered to support one Engineering student from a disadvantaged background who has performed at a high academic level at the start of their studies at Lancaster. It will be awarded to the first-year student during their second year who meets the following criteria:
The recipient must be a home fee-paying student.
The recipient must be from a disadvantaged background.
The recipient must pass all modules in the academic year on the first attempt and achieve the highest overall aggregate score from all modules (with a minimum of 17.5).
The bursary will be given in three £1,000 instalments over the course of the academic year. You do not need to apply for the scholarship - the selection process is internal.
A place for Milola
Has studying at Lancaster met your expectations? I think, honestly, it's surpassed my expectations! The lecturers are nice and students in the second and third year help you if you have questions. If I have questions or if I don't understand something during the lectures, I can go to the lecturer after the session and talk about it later.
What is it like studying first year Engineering? I won't say it's easy, but it's fun! I know we have more lectures than other courses do, but we have less reading, so we learn through lecturers explaining concepts, which I think is better than if you had to study it all on your own
What has been your favourite part of the first year? I like the practicals - being taught something in the lectures, understanding it, and doing it in real life is amazing. We were tasked with designing a robot that could climb up a pipe. We were put in groups and everyone got to throw their ideas in and were able to design something cool.
What's the atmosphere like in classes? It's a friendly environment where I can ask questions, and I ask a lot of questions! The labs are louder and more lively than lectures. I feel like each lecturer has been able to explain concepts properly. In the labs, there is usually more than one instructor, so there's enough help to go around.
Why is Lancaster the place for you? I love the way the campus looks. I had a friend come over, and she was impressed with the library. She said "I can't believe you have a tree in the middle of your library! That's so cool!"
Our Main Engineering Lab is a large and spacious, double-floored room home to the Engineering Strongfloor, Robotics area, and Wind Tunnel. Here is where you'll get the opportunity to load test materials and constructions, and work on projects involving robotics or renewable energy.
Electronics Lab
Our Electronics Lab is equipped with equipment such as oscilloscopes, signal generators, and power supplies to allow you to undertake prototyping and practical work in electronics.
Additive Manufacturing Lab
Our Additive Manufacturing Lab comes equipped with a number of 3D printers and laser-based additive machines to fabricate items that wouldn't be possible using more traditional subtractive methods.
Chemical Engineering Lab
The Chemical Engineering Teaching Lab is where you'll in small groups to rotate around an assortment of experimental apparatus to engage and learn about industrial processes along with the associated health and safety, COSHH assessment, and substance controls.
Teaching Lab
Our Teaching Lab houses a variety of engineering apparatus that you'll get to use throughout your degree, from 3D printers and robotics arms, to CNC machines.
Mechanical Engineering Lab
In the Mechanical Engineering Lab, you'll be able to join your peers working on the Formula Student project. Formula Student is an international racing competition for a single-seater racing car covering a number of static judging (design, marketing and cost) and different dynamic (acceleration, sprint, endurance) events.
Breakout Space
Within the School of Engineering, we have a dedicated Breakout Space for you to get together with other students and collaborate on work, or otherwise socialise in your downtime between lectures, workshops, and labs.
Computer Lab
The School's Computing Lab comes fully equipped with all of the software you'll need in order to create virtual prototypes of your projects, or work on electronic or embedded systems.
Engineering Projects Lab
Engineering Projects make up a significant proportion of most of our Engineering degrees and involve a great deal of collaboration with your peers. This space is dedicated for you to work on these projects, allowing you the room to create and test prototypes.
Keep your options open
If you're unsure of which area of specialisation you'd like to go into upon application, you can use the UCA code H100 Engineering to leave your options open. The common first year lets you change your specialisation allowing a more informed choice at the end of year one, subject to meeting the requirements of that course.
The information on this site relates primarily to 2025/2026 entry to the University and every effort has been taken to ensure the information is correct at the time of publication.
The University will use all reasonable effort to deliver the courses as described, but the University reserves the right to make changes to advertised courses. In exceptional circumstances that are beyond the University’s reasonable control (Force Majeure Events), we may need to amend the programmes and provision advertised. In this event, the University will take reasonable steps to minimise the disruption to your studies. If a course is withdrawn or if there are any fundamental changes to your course, we will give you reasonable notice and you will be entitled to request that you are considered for an alternative course or withdraw your application. You are advised to revisit our website for up-to-date course information before you submit your application.
More information on limits to the University’s liability can be found in our legal information.
Our Students’ Charter
We believe in the importance of a strong and productive partnership between our students and staff. In order to ensure your time at Lancaster is a positive experience we have worked with the Students’ Union to articulate this relationship and the standards to which the University and its students aspire. View our Charter and other policies.
Our historic city is student-friendly and home to a diverse and welcoming community. Beyond the city you'll find a stunning coastline and the picturesque Lake District.
